manualshive.com logo in svg

Dell Chassis Management Controller, User Manual

Share
Download
Dell Chassis Management Controller User Manual Download Page 91

Setting First Boot Device Using RACADM

Setting First Boot Device For Multiple Servers Using CMC Web Interface

NOTE: To set the first boot device for servers, you must have Server Administrator privileges or Chassis 
Configuration Administrator privileges and iDRAC login privileges.

To set the first boot device for multiple servers using the CMC Web interface:

1.

In the system tree, go to Server Overview, and then click Setup

 → 

First Boot Device. A list of servers is displayed.

2.

In the First Boot Device column, from the drop-down menu, select the boot device you want to use for each server.

3.

If you want the server to boot from the selected device every time it boots, clear the Boot Once option for the 

server. If you want the server to boot from the selected device only on the next boot cycle, select the Boot Once 

option for the server.

4.

Click Apply to save the settings.

Setting First Boot Device For Individual Server Using CMC Web Interface

To set the first boot device for servers, you must have Server Administrator privileges or Chassis Configuration 
Administrator privileges and iDRAC login privileges.
To set the first boot device for individual server using the CMC Web interface:

1.

In the system go to Server Overview, and then click the server for which you want to set the first boot device.

2.

Go to Setup

 → 

First Boot Device. The First Boot Device page is displayed.

3.

From the First Boot Device drop-down menu, select the boot device you want to use for each server.

4.

If you want the server to boot from the selected device every time it boots, clear the Boot Once option for the 

server. If you want the server to boot from the selected device only on the next boot cycle, select the Boot Once 

option for the server

5.

Click Apply to save the settings.

Setting First Boot Device Using RACADM

To set the first boot device, use the 

cfgServerFirstBootDevice

 object.

To enable boot once for a device, use the 

cfgServerBootOnce 

object.

For more information about these objects, see the

 RACADM Command Line Reference Guide for iDRAC and CMC 

available at dell.com/support/manuals.

Configuring Server FlexAddress

For information to configure FlexAddress for servers, see 

Configuring FlexAddress for Server-Level Slots

.

Configuring Remote File Share

The Remote Virtual Media File Share feature maps a file from a share drive on the network to one or more servers 
through CMC to deploy or update an operating system. When connected, the remote file is accessible as if it is on the 
local system. Two types of media are supported: floppy drives and CD/DVD drives.
To perform a remote file share operation (connect, disconnect, or deploy), you must have Chassis Configuration 
Administrator or Server Administrator privileges.

91

Summary of Contents for Chassis Management Controller











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands