manualshive.com logo in svg

Dell Chassis Management Controller, User Manual

Share
Download
Dell Chassis Management Controller User Manual Download Page 138

Using Telnet Console With CMC

You can have up to four Telnet sessions with CMC at a time.
If your management station is running Windows XP or Windows 2003, you may experience an issue with the characters 
in a CMC Telnet session. This issue may occur as a frozen login where the return key does not respond and the 
password prompt does not appear.
To fix this issue, download hotfix 824810 from the Microsoft Support website at support.microsoft.com. See Microsoft 
Knowledge Base article 824810 for more information.

Using SSH With CMC

SSH is a command line session that includes the same capabilities as a Telnet session, but with session negotiation and 
encryption to improve security. The CMC supports SSH version 2 with password authentication. SSH is enabled on the 
CMC by default.

NOTE: The CMC does not support SSH version 1.

When an error occurs during the CMC login, the SSH client issues an error message. The message text is dependent on 
the client and is not controlled by the CMC. Review the RACLog messages to determine the cause of the failure.

NOTE: 

OpenSSH

 must be run from a VT100 or ANSI terminal emulator on Windows. You can also run 

OpenSSH 

using Putty.exe. Running 

OpenSSH

 at the Windows command prompt does not provide full functionality (that is, 

some keys do not respond and no graphics are displayed). For Linux, run SSH Client Services to connect to CMC 
with any shell.

Four simultaneous SSH sessions are supported at a time. The session timeout is controlled by the 

cfgSsnMgtSshIdleTimeout

 property. For more information, see the database property chapter of the 

RACADM 

Command Line Reference Guide for iDRAC7 and CMC

, the Services Management page in the Web interface, or see 

Configuring Services

CMC also supports Public Key Authentication (PKA) over SSH. This authentication method improves SSH scripting 
automation by removing the need to embed or prompt for user ID/password. For more information, see 

Configure Public 

Key Authentication over SSH

 .

SSH is enabled by default. If SSH is disabled, then you can enable it using any other supported interface.
To configure SSH, see 

Configuring Services

.

Related Links

Configuring Services

Supported SSH Cryptography Schemes

To communicate with CMC using SSH protocol, it supports multiple cryptography schemes listed in the following table.

Table 27. : Cryptography Schemes

Scheme Type

Scheme

Asymmetric Cryptography

Diffie-Hellman DSA/DSS 512–1024 (random) bits per NIST 
specification

Symmetric Cryptography

•

AES256-CBC

•

RIJNDAEL256-CBC

•

AES192-CBC

138

Summary of Contents for Chassis Management Controller











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands