manualshive.com logo in svg

Dell Chassis Management Controller, User Manual

Share
Download
Dell Chassis Management Controller User Manual Download Page 69

Configuring Services

You can configure and enable the following services on CMC:

•

CMC Serial console — Enable access to CMC using the serial console.

•

Web Server — Enable access to CMC Web interface. If you disable the option, use local RACADM to re-enable 

the Web Server, since disabling the Web Server also disables remote RACADM.

•

SSH — Enable access to CMC through firmware RACADM.

•

Telnet — Enable access to CMC through firmware RACADM

•

RACADM — Enable access to CMC using RACADM.

•

SNMP — Enable CMC to send SNMP traps for events.

•

Remote Syslog — Enable CMC to log events to a remote server.

CMC includes a Web server that is configured to use the industry-standard SSL security protocol to accept and transfer 
encrypted data from and to clients over the Internet. The Web server includes a Dell self-signed SSL digital certificate 
(Server ID) and is responsible for accepting and responding to secure HTTP requests from clients. This service is 
required by the Web interface and remote RACADM CLI tool for communicating with CMC.
If the Web server resets, wait at least one minute for the services to become available again. A Web server reset usually 
happens as a result of any of the following events:

•

Network configuration or network security properties are changed through the CMC Web user interface or 

RACADM.

•

Web Server port configuration is changed through the Web user interface or RACADM.

•

CMC is reset.

•

A new SSL server certificate is uploaded.

NOTE: To modify Service settings, you must have Chassis Configuration Administrator privilege.

Remote syslog is an additional log target for CMC. After you configure the remote syslog, each new log entry generated 
by CMC is forwarded to the destination(s).

NOTE: Since the network transport for the forwarded log entries is UDP, there is no guaranteed delivery of log 
entries, nor is there any feedback to CMC whether the log entries were received successfully.

Configuring Services Using CMC Web Interface

To configure CMC services using CMC Web interface:

1.

In the system tree, go to Chassis Overview, and then click Network

 → 

Services. The Services page is displayed.

2.

Configure the following services as required:

– CMC serial console
– Web server
– SSH
– Telnet
– Remote RACADM
– SNMP
– Remote Syslog

For information about the fields, see 

CMC Online Help

.

69

Summary of Contents for Chassis Management Controller











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands