manualshive.com logo in svg

Dell Chassis Management Controller, User Manual

Share
Download
Dell Chassis Management Controller User Manual Download Page 164

Managing VLAN for IOM

Virtual LANs (VLANs) for IOMs allow you to separate users into individual network segments for security and other 
reasons. By using VLANs you can isolate the networks for individual users on a 32 port switch. You can associate 
selected ports on a switch with selected VLAN and treat these ports as a separate switch.
CMC Web Interface allows you to configure the in-band management ports (VLAN) on the IOMs.
Related Links

Configuring VLAN settings on IOMs Using CMC Web Interface
Viewing the VLAN settings on IOMs Using CMC Web Interface
Viewing the Current VLAN Settings on IOMs Using CMC Web Interface
Adding Tagged VLANs for IOMs Using CMC Web Interface
Removing VLANs for IOMs Using CMC Web Interface
Updating Untagged VLANs for IOMs Using CMC Web Interface
Resetting VLANs for IOMs Using CMC Web Interface

Configuring VLAN settings on IOMs Using CMC Web Interface

NOTE: You can configure VLAN settings only on PowerEdge M I/O Aggregator IOM. Other IOMs including MXL 
10/40GbE are not supported.

To configure the VLAN settings on IOM(s) using the CMC Web interface:

1.

In the system tree, go to I/O Module Overview and click Setup VLAN Manager.
The VLAN Manager page displays the IOM(s) that are powered on and the available ports.

2.

In the Select I/O Modulesection, select the configuration type from the drop down list, and then select the required 

IOM(s).
For information about the fields, see 

CMC Online Help

3.

In the Specify Port Range section, select the range of fabric ports to be assigned to the selected IOM(s).
For information about the fields, see 

CMC Online Help

4.

Select the Selector Deselect All option to apply the changes to all or no IOMs.
or
Select the check box for the specific slots to select the required IOMs.

5.

In the Edit VLANs section, enter the VLAN IDs for the IOMs. Enter VLAN IDs in the range 1-4094. VLAN IDs can be 

entered as a range or separated by a comma. Example: 1,5,10,100-200.

6.

Select one of the following options from the drop-down menu as required:

– Add Tagged VLANs
– Remove VLANs
– Update untagged VLANs
– Reset to all VLANs
– Show VLANs

7.

Click Save to save the new settings made to the VLAN Manager page.
For information about the fields, see 

CMC Online Help

NOTE: The Summary VLANs of All Ports section displays information about the IOMs present in the Chassis 
and the assigned VLANs. Click Save to save a csv file of the summary of the current VLAN settings.

NOTE: The CMC Managed VLANs section displays the summary of all VLANs assigned to the IOMs.

164

Summary of Contents for Chassis Management Controller











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands