manualshive.com logo in svg

Dell Chassis Management Controller, User Manual

Share
Download
Dell Chassis Management Controller User Manual Download Page 15

•

Secure Sockets Layer (SSL) encryption — Provides secure remote system management through the Web 

interface.

•

Launch point for the Integrated Dell Remote Access Controller (iDRAC) Web interface.

•

Support for WS-Management.

•

FlexAddress feature — Replaces the factory-assigned World Wide Name/Media Access Control (WWN/MAC) 

IDs with chassis-assigned WWN/MAC IDs for a particular slot, an optional upgrade.

•

Graphical display of chassis component status and health.

•

Support for single and multi-slot servers.

•

LCD iDRAC configuration wizard supports iDRAC network configuration.

•

iDRAC single sign-on.

•

Network time protocol (NTP) support.

•

Enhanced server summary, power reporting, and power control pages.

•

Forced CMC failover, and virtual reseat of servers.

•

iDRAC reset without rebooting the operating system.

•

Multi-chassis management, allows up to eight other chassis to be visible from the lead chassis.

•

Support for storage array configuration using RACADM — Allows you to configure IP,  join or create group, and 

select fabric for storage arrays using RACADM.

•

Multi-chassis management:

– capability to select chassis configuration properties from Lead Chassis and push to Group Members
– capability for Group Members to keep their chassis settings synchronized with the Lead Chassis

•

Support to save BIOS configuration information to hard disk and restore to same or different server.

Security Features

The CMC provides the following security features:

•

Password-level security management — Prevents unauthorized access to a remote system.

•

Centralized User authentication through:

– Active Directory using Standard Schema or an Extended Schema(optional.)
– Hardware-stored user IDs and passwords.

•

Role-based authority — Enables an administrator to configure specific privileges for each user.

•

User ID and password configuration through the Web interface.

•

Web interface supports 128-bit SSL 3.0 encryption and 40-bit SSL 3.0 encryption (for countries where 128-bit is 

not acceptable).

NOTE: Telnet does not support SSL encryption.

•

Configurable IP ports (if applicable).

•

Login failure limits per IP address, with login blocking from the IP address when the limit is exceeded.

•

Configurable session auto time out, and more than one simultaneous sessions.

•

Limited IP address range for clients connecting to the CMC.

•

Secure Shell (SSH), which uses an encrypted layer for higher security.

•

Single Sign-on, Two-Factor Authentication, and Public Key Authentication.

Chassis Overview

The following figure shows the facing edge of a CMC (inset) and the locations of the CMC slots in the chassis.

15

Summary of Contents for Chassis Management Controller











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands