degdrive DGI900, User Manual, Page: 251 / 251

251
the system processing time, the system delays the processing after the data is processed
until the response delay time arrives. Send data.
PC.04 Communication
timeout
Range: 0.0s~60.0s
【
0.0s
】
When this function code is set to 0.0 s, the communication timeout parameter is invalid.
When this function code is set as valid value, if the interval time between one
communication and the next communication exceeds the communication timeout, the
system will report a communication error (E-15 will be set to invalid normally.) If the function
of continuous communication of the system, set the secondary parameters, you can monitor
the communication status.
PC.05 Read data return format
selection
Range: 0~1
【
0
】
0: return data is 2 bytes high and low 8 bits:
1: return data bit 1 byte.