manualshive.com logo in svg

Deep Sea Electronics Plc DSE5110, Operating Manual

Share
Download
Deep Sea Electronics Plc DSE5110 Operating Manual Download Page 5

 

DSE Model 5110 Automatic Start Engine Management Instrumentation System 

                 Part No. 057-009          5110 Operating Manual Issue 3.3        3/1/2006             

5

 

1 INTRODUCTION 

 
The 

DSE 5110

 autostart module has been designed to allow the OEM to meet increasing demand within 

the industry. It has been primarily designed to allow the user to start and stop the generator. The user 
also has the facility to view all the system operating parameters via the LCD display. 
 
The 

DSE 5110

 module monitors the engine, indicating the operational status and fault conditions 

automatically shutting down the engine and giving a true first up fault condition of an engine failure by a 
flashing COMMON ALARM LED. Exact failure mode information is indicated by the LCD display on the 
front panel. 
 
The powerful Microprocessor contained within the module allows for a range of complex features to be 
incorporated as standard:  
 

•

 

Graphical Icon based LCD display (excluding the need for translations and languages). 

•

 

Engine parameter monitoring and instrumentation. 

•

 

Generator Voltage, Frequency & Current instrumentation. 

•

 

Fully configurable inputs for use as alarms or a range of different functions. 

•

 

Extensive range of output functions using built in relay outputs. 

•

 

‘Front panel’ configuration of operating parameters. 

•

 

PC configurable using 5xxx configuration software for Windows™ and P810 interface module. 

 
The module is housed in a robust plastic case for front panel mounting. Connections to the module are 
via locking plug and sockets. 
 

CALL US TODAY 

1-888-POWER-58

REQUEST A QUOTE 

[email protected]

SHOP ONLINE 

www.genpowerusa.com

Summary of Contents for DSE5110























































Reviews:

No comments

Brands by name

Popular brands

Load more brands