DSE Model 5110 Automatic Start Engine Management Instrumentation System
Part No. 057-009 5110 Operating Manual Issue 3.3 3/1/2006
23
9.2 EDITING AN ANALOGUE VALUE
Enter the front panel configuration editor as described above. Press the
9
button to enter adjust mode.
When in adjust mode (indicated by the flashing
icons in the module display), pressing the
+
or
–
buttons will change the selected parameter to the desired value. Press the
9
button to ‘save’ the value. The
icons will stop flashing to confirm that it has been saved.
To select the next parameter to edit, press the
+
button. Continuing to press the
+
/
–
buttons will cycle
through the adjustable parameters in the order shown in the following lists.
Timers display in seconds up to 59 seconds, then in minutes upto the timer’s
maximum value.
For instance, the parameter being displayed in this example is the cooling timer
(parameter 7). It’s current value is 2.5mins (2mins 30secs).
9.3 EDITING A ‘LIST’ VALUE
Some configuration parameters have a list of options to select from. These include input and output settings.
This example shows the setting for LCD indicator 1 (parameter 29). It’s current
setting is 3 (‘Load Transfer from the list shown overleaf).
NOTE:- When in adjust mode (indicated by the flashing
icons in the module display),
pressing the (stop mode) button will cancel any changes made to the current parameter,
reverting to the last ‘saved’ value. This also exits adjust mode.
NOTE:- To exit the front panel configuration editor at any time press the STOP
button.
Ensure you save any changes you have made by pressing the
9
button first if necessary.
CALL US TODAY
1-888-POWER-58
REQUEST A QUOTE
SHOP ONLINE
www.genpowerusa.com
