Power Supply
Removal of the Power Supply is a simple procedure, and can be
done without removing other components.
1. Unplug the 2 Power Supply cables from the motherboard (refer
to diagram in Genesis MP Motherboard).
2. Unplug the power switch connector from the power supply har-
ness (Power Supply Power Switch units only). See the section
Power Switch and Cable for more information.
3. Unplug the Power Supply from the Drive Power/Fan Power
Harness See section Drive Power/Fan Power Harness.
IMPORTANT
There is limited clearance between the motherboard power con-
nector and the power supply bracket. In rare cases it may be nec-
essary to loosen the motherboard securing screws to provide room
to slide the motherboard and remove the cable. See the section
Genesis MP Motherboard if necessary.
4. Carefully clip the cable-ties which hold the speaker cable to to
the power supply harness, and the cable ties holding the 3.3v
nPOWER supply cable to the motherboard tray (above the fans
and PCI bracket).
Power supply harness
Genesis MP
Chapter 4 – Removal and Replacement
◆
47
∆
!
