Lithium Battery
Genesis MP uses a lithium battery to store users’ preferences and
time and date information while the unit is not turned on.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the battery
manufacturer. Dispose of used batteries according to the instruc-
tions listed in the Preface.
Battery location
Here are the steps for replacing the lithium battery.
1. Put on your anti-static wrist strap.
2. Remove the battery cover by placing a thin bladed screw driver
between the battery and the black battery cover and gently
pushing the tip of the blade away from the battery while lifting
up on the battery cover. It may be necessary to duplicate this
step on both sides of the battery.
Removing the battery cover
3. With the battery cover removed, note the orientation of the bat-
tery and then grasp the battery on the sides and pull it out.
4. Orient the new battery properly over the battery connector and
and push it into place.
5. Reinstall the battery cover.
Chapter 4 – Removal and Replacement
Genesis MP
64
◆
∆
!
