nPOWER Processor Card
1. Shut down the Genesis MP and remove power from the unit.
2. Open Genesis MP (loosen the side door panel) by following the
easy instructions in the Genesis MP User Guide.
3. Put on the anti-static wrist strap.
4. Disconnect the power connector from the nPOWER card. Be
sure to disengage the connector lock as you pull the plug.
Disconnecting power from the
nPOWER card
5. Locate and unscrew the two hand screws on either side of the
nPOWER card bracket. Be careful to support the card as the
last screws are unscrewed.
Note: These screws are designed to stay attached to the
bracket once they have been unscrewed from the chassis.
Locating the nPOWER
card bracket
Chapter 4 – Removal and Replacement
Genesis MP
36
◆
Connector lock
nPOWER power connector
nPOWER card bracket
4 hand screws
