5. Remove the two screws holding the power supply retainer in place.
Power supply retainer
(side view)
6. Remove the power supply retainer.
7. Remove the CD-ROM Bezel and the Removable Media Bay
Bezel (if installed).
8. Loosen the screws holding the CD-ROM drive (and any device
installed in the removable media bay) and slide toward the front of
the machine to provide clearance for removing the power supply.
9. Slide the power supply toward the front of the machine and up
to remove.
10. Unplug the power supply cable assembly from the side of the
power supply.
IMPORTANT
Retain the power supply cable assembly. It is not furnished with
the power supply replacement subassembly! If the power supply
cable assembly needs to be replaced, order one at this time.
Replacement is the reverse of removal, with these exceptions:
1. Align the Power Supply’s locator tabs with the slots in the power
supply bracket
.
Power supply locator tabs
(seen from below)
Chapter 4 – Removal and Replacement
Genesis MP
48
◆
∆
!