Reassembly is the reverse of disassembly, with the following
exceptions:
1. Take care not to damage the speaker - it is vulnerable until the
machine is assembled.
2. Route and dress cables as in original unit. See section Speaker
Cable/LED Cable/Power Switch Cable Routing. Cable routes
above 3.5˝ drive bay and through wiring harness cable anchor.
Carefully install new cable ties at anchor points.
Speaker Cable/LED Cable/Power Switch Cable Routing
• The speaker cable is routed to the top-right of the front
panel and into the Genesis MP chassis. The speaker cable
should be tied off to the drive bay/fan power cable assembly.
• The LED cable and power switch cables are routed to the
center-right of the front panel and into the Genesis MP chas-
sis.
.
LED, power switch and
speaker cable routing
(motherboard power units)
LED, power switch and
speaker cable routing
(power supply power units)
Chapter 4 – Removal and Replacement
Genesis MP
58
◆
