Genesis MP
Chapter 3 – Troubleshooting Guide
◆
29
In the event the floppy drive does not eject the floppy diskette
perform the following procedures:
1. Power off the computer. Hold down the mouse button while
powering the computer on.
2. Check with a known-good floppy drive.
3. Replace the floppy drive.
4. Replace the floppy drive cable.
5. Replace the nPOWER card.
6. Replace the motherboard.
In the event the floppy drive attempts to eject the diskette but
cannot, perform the following procedures:
1. Ensure the front panel correctly aligns with the floppy drive.
2. Ensure the diskette is in good condition.
3. Check with a known-good floppy drive.
4. Replace the floppy drive.
In the event the floppy drive runs continuously perform the fol-
lowing procedures:
1. Check the floppy disk drive with a known-good diskette.
2. Check with a known-good floppy drive.
3. Replace the floppy drive.
4. Replace the floppy drive cable.
5. Replace the nPOWER card.
6. Replace the motherboard.
