DAVIS TECHNOLOGIES TC-3 Series, Instructions Manual

Page: 7 / 60

6
TC3 Series Traction Control
www.moretraction.com
Remote Display
The TC3 series can use a Remote Display
(purchased separately) for the user to interface with
the unit for setup and configuration.
The Remote display can be used with many other
Davis products such as the Profiler, PFEFI, Smart
Relay, Digital Ignition Controller, and the VPS.
The Remote Display does not need to be plugged in
for the TC3 to function, it may be used only as
needed to access the TC3. However, there are no
issues with leaving it connected at all times.
Be certain to return to the Home Screen before
making a run.
IMPORTANT-Always plug the cord into the Remote
first, then into the TC3.