DAVIS TECHNOLOGIES TC-3 Series, Instructions Manual

Page: 40 / 60

39
TC3 Series Traction Control
www.moretraction.com
Settings
The Settings screen is used to set a few system
parameters, such as pulses per revolution being
input and the CAN network settings.
Settings
CAN Base
Address
Back
4
RPM Pulses
Per Rev
32
CAN Bus
Frequency
1000
RPM Pulses Per Rev needs to be set to the number
of pulses output per revolution of the measured
shaft. Example, Davis DSRPM ring would be set to
32, other rings may be 8 or 16 and engine RPM
would be 4 on a V8 engine.
RPM Pulses
Per Rev
Save
+ +
- -
0 8
Set To The Number Of
Triggers Per Revolution Of
Measured Shaft
(Engine or Driveshaft)