DAVIS TECHNOLOGIES TC-3 Series, Instructions Manual

Page: 42 / 60

41
TC3 Series Traction Control
www.moretraction.com
applications, a single resistor anywhere in the
system provides stable communications. This
resistor is built into some devices, such as the Davis
Digital Ignition Controller, and most EFI systems.
Simply tying into these devices network may provide
sufficient signal control.
If termination resistor is not available, lower speeds
may be used with excellent results.
CAN
Frequency
Save
+
-
1
Set To The Desired CAN Baud
Rate. All Devices On
Network MUST Run The
Same Baud Rate
0- 1Mbps
1- 500Kps
2 -250Kps
3-125Kps
See appendix B for info on CAN transmit Detail.