DAVIS TECHNOLOGIES TC-3 Series, Instructions Manual

Page: 34 / 60

33
TC3 Series Traction Control
www.moretraction.com
Analog Input
This parameter is used to configure a retard as
analog voltage increases on the analog input wire.
This can be used as a wheelie control in conjunction
with an optical ride height sensor or analog pitch
sensor.
The blacked-out buttons would be active if the Davis
Technologies Wheel Control strategy were installed.
(optional add on)
Analog
Input
Correction
Deg
Per Volt
Neutral
Voltage SD
Voltage
SD=
TPS Lift
Start
Time
Back
0.000
0.000
4.000
Disabled
0.000
Wheelie
Control
Disabled
Deg
Per Volt
Save
+ +
- -
0 0
+ +
- -
0 0
+
-
0
Degrees of Timing
Retard per Volt on
Input wire.
(Default=00.000 deg)