DAVIS TECHNOLOGIES TC-3 Series, Instructions Manual

Page: 52 / 60

51
TC3 Series Traction Control
www.moretraction.com
FuelTech Config
When the TC3 is connected to a FuelTech EFI, you
must setup 2 input pins using the Inputs dialog in
the FT Manager software. Set one pin up as Davis
Profiler Input and one as Davis SmartDrop® Input.
Simply connect the corresponding TC3 output to the
appropriate pins. The FuelTech EFI is now
configured to receive signals from the TC3 to initiate
Timing Retard (35 deg retard Max) or SmartDrop®.
The FT Manager Diagnosis panel can be used to test
the Inputs.