DAVIS TECHNOLOGIES TC-3 Series, Instructions Manual

Page: 15 / 60

14
TC3 Series Traction Control
www.moretraction.com
Wheelie Control
(add-on purchased separately)
The TC3 can have a Wheelie Control strategy
installed to control excessive pitch. This is
triggered via an analog signal such as from an
optical sensor outputting 0-5v. The much-preferred
method of Wheelie Control is through the use of a
Davis Technologies VPS, which measure vehicle
pitch, not height. However, if you already have a
ride height sensor, this option may be useful.
Example Screen of TC3 Wheelie Control (optional)
Wheelie
Control
Correction
Deg
Per Volt
Neutral
Voltage SD
Voltage
SD=
TPS Lift
Start
Time
Back
2.500
1.250
3.500
Disabled
.600
Wheelie
Control
Enabled