DAVIS TECHNOLOGIES TC-3 Series, Instructions Manual

Page: 30 / 60

29
TC3 Series Traction Control
www.moretraction.com
Utilities
Press the Timing button to run a timing test. Once
pressed the TC3 should cause a timing retard sweep
up to the Max Retard set.
Press the SmartDrop® button to test SmartDrop®.
Once pressed the TC3 will drop cylinders up to the
maximum set in the Max SmartDrop® settings.
Test Outputs
SmartDrop
Back
Timing
The Test Inputs screen is used to test various inputs
of the system. The red boxes will fill with a white
square when triggered. Ext Analog shows the
voltage input on the analog input wire.
Press the Test button on the bottom of the TC3 to
exit this screen.
Test Inputs
TB/Sync
Arm/Aux
Driveshaft
TPS
0.003
V
Ext Analog