Datex-Ohmeda 7100, Technical Reference Manual

Page: 136 / 158

7100 Anesthesia Ventilator
8-8 02/03 1006-0836-000
Figure 8-5 • Pneumatic Engine, view 1 of 2 (Aestiva machine)
Item Description Stock Number
Pneumatic Engine Assembly, Service-Aestiva machine 1504-8503-000
1 Regulator
O-ring, 9.25 ID x 12.8 OD (2) 1504-3623-000
1503-3056-000
2 PEEP Valve (blue dot) 1504-3610-000
3 PEEP Safety Valve (white dot) 1504-3608-000
4 Pressure Sense Switch
O-ring, 3.63 ID x 8.87 OD 1504-3607-000
1006-4156-000
5 Fitting, 6.35-mm (1/4-inch) 1504-3621-000
6 Plug, 6.35-mm (1/4-inch) 1503-3245-000
7 Manifold Plate Assembly See Figure 8-7
8 Inspiratory Flow Control Valve
O-ring, 9.25 ID x 12.8 OD (2) 1504-3620-000
1503-3056-000
9 Harness, valve switches 1504-5700-000
10 Fitting, 8-mm Drive Gas 1504-3618-000
11 Filter, 2-micron ( install course side UP ) 1504-3708-000
12 O-ring, 28.24 ID 33.48 OD 1504-3612-000
13 Retainer, filter 1504-3707-000
14 Screw, M4x20 SKT HD CAP
Lockwasher, M4 internal 1503-3105-000
0144-1118-128
Note: The wire harnesses are tie-wrapped at this point to help keep the wires from interfering with the
MOPV weight. If you cut the tie wrap when replacing the Inspiratory Valve or the PEEP Valve harness, be
sure to tie-wrap the harnesses at the same point to ensure proper operation of the MOPV.
8
11
5 6
9
10
12
13
1 2 3 4
7
14
See Note
w w
w w
Do Not Overtighten