Datcon DT9000, Operating Instructions Manual

Page: 11 / 96

DT9000
20171205-V2
11
4.3. Mounting as a wall-instrument
Removing the front
cover
In order to remove the front cover, first remove the four
fixing screws as shown in the drawing. A
screwdriver of
appropriate head-size only should be used. Using
screwdrivers with inappropriate head-size may cause a
damage in the screws’ heads or in the instrument front
panel.
Remove the screws by turning them in anticlockwise
direction as shown in the drawing
Step (1) . The screws are
secured against falling out. After this you can simply take
away the front cover from the housing
(2) and you can
open it by turning it downwards (3) . Plastic ties are used to
fasten the front cover to the housing, preventing it from
falling.