Datcon DT9000, Operating Instructions Manual

Page: 53 / 96

DT9000
20171205-V2
53
Sequence of operations 9. If the codes written in for the first and second time are
identical with each other, the device exits from the menu
item. You see this

on the display.
Do not forget the user code you have specified. If you
forget it, defining another one is possible only by using a
supervisor code for entering into the menu.
Returning into the menu
item Changing the user
code 1. As you have already left the menu item Changing the
user code , you see this:

.
(2. If you want to change the setting you have performed
just now, or if you just want to check what you have typed
in, continue the operation from
Point 3 of the Sequence
of operations. )
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the
▲ button to
select the desired menu items.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.