Datcon DT9000, Operating Instructions Manual

Page: 72 / 96

DT9000
72
20171205-V2
10.7. Setting up the instrument (Example)
Exercise There is a pressure transmitter with a measurement range
of 5-150 bar corresponds to 4-20 mA.
Let the settings of DT9000 be the following:
•
Number of decimals: 2.
•
The physical value assigned for the 4 mA current: 5.00
•
The physical value assigned for the 20 mA current:
150.00
•
The leader zeros are not displayed.
Enter the menu Enter the menu by using a Supervisor Code.
The way the code should be typing in is described in
Chapter
7.1. Typing the code in. You see on the display:

.
Setting the decimal point 1. Keep stepping by pressing the ▲ button as long as you
see this menu item:

.
2. Enter the menu item by pressing the ENTER button.
3. You see this

on the display. The mnemonic is
blinking.
4. Set the number of decimals to two by pressing the
▲
button:


.
5. Press the MENU button, to exit from the menu item, and
you see this:

.
Setting the physical
value assigned to 4 mA 1. Pressing the ▲ button keep stepping as long as you see
this menu item:

.
2. Enter the menu item by pressing the ENTER button.
3. Pressing the ▲ button you can increase the value of the
blinking number:
4. Pressing the
► button you can select the next digit.
5. Set the value

.
6. Press the MENU button, to exit from the menu item, and
you see this:

.