DT9000
62
20171205-V2
8. Fault rectification
8.1. Fault finding
The instrument has a sophisticated self-test function. It is
able to detect and display the majority of the errors.
All the error messages are described in detail in chapters
10.3
and
10.4
of the Appendix.
In the case of an error that causes total inability of the
instrument to function, nothing appears on the display.
8.2. Repairing
In accordance with Point
2.1.
:
For safety and warranty
reasons, any internal work on the instrument must be
carried out by DATCON personnel.
In the case of errors, it is recommended to notice of the
displayed error message, as well as of the phenomenon
seen.
These information please communicate to the Datcon
service personnel.
9. Dismounting
9.1. Dismounting procedure
The steps described in Chapter
4. Mounting
should be
performed in reverse sequence. Upon dismounting the
instrument, observing all the safety rules is mandatory, like
upon mounting.
Only qualified and authorised professionals may perform
the dismounting operations.
9.2. Disposal
According
with
the
concerning EU directive, the
Manufacturer undertakes the disposal of the instrument
that are manufactured by it and intended to be destroyed.
Please deliver it in contamination-free condition to the site
of the Manufacturer or to a specialised recycling company.
Summary of Contents for DT9000
