27
MEM Menus
The SE-1000 can store up to 10 panel settings in the preset memory. The preset memory is flash memory,
so it is stored even when the SE-1000 is switched off, or initialised (INIT).
The following settings can be stored:
Item Description
Default
Value
A Bus 1
B Bus 1
Key S
1
Key F
1
AUX Bus
1
CROSSPOINT
Colour Background
WHITE
Wipe Pattern
4 (Centre)
Border Width
50
Soft Edge Width
4
WIPE
Border Colour
YLW (Yellow)
BKGD / KEY Selection
BKGD
MIX / WIPE Selection
MIX
Auto Transition Time (BKGD)
30 F (Frames)
TRANSITION AREA
Auto Transition Time (KEY)
30 F (Frames)
Key Type (TYPE)
LIN
Key Adjustment (ADJ)
GAIN: 100
CLIP: 0
DENS: 100
Inversion ON / OFF
OFF
Fill Colour
BLE (Blue)
Edge Colour
YLW (Yellow)
Edge ON / OFF (TYPE)
OFF
KEY
Edge Width
4
User Colour 1 (HUE / SAT / LUM)
0 , 0 , 100
User Colour 2 (HUE / SAT / LUM)
355 , 100 , 7
User Colour 3 (HUE / SAT / LUM)
50 , 100 , 9
USER COLOUR
User Colour 4 (HUE / SAT / LUM)
0 , 0 , 0
Menu 1/3
PSMEM
Preset Memory
PSMEM 1/3 allows you to store, recall and clear presets.
Press the [FUNC] button, so that it is illuminated, and then press the [MEM] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until PSMEM 1/3 is displayed.
Rotate Adjustment Knob F2 to select the mode you require:
STOR
-
To store values to a preset
RECL
-
To recall values from a preset and change the panel settings
CLR
-
To clear values from a preset
