9
Control Panel
The SE-1000 control panel looks like this:
The layout is clearly labelled, and easy to follow. Many of the buttons have more than one function and are
labelled with different descriptions. For example the nine wipe buttons also have secondary functions when
the [FUNC] button is lit; these secondary functions are printed beneath each key.
Here is a guide to each part of the control panel:
1
Power On/ Off switch. Switched to the “I” position power is on, and in the “O” position power is off.
When power is On the Power Light (
2
) should light up. You will notice that the power switch has
been designed to prevent the SE-1000 from being accidentally switched off.
2
Power and Alarm LEDs. The Power LED is lit when the SE-1000 is powered on. The Alarm LED will
light up if there is a problem detected, for example if the fan has stopped running or the DC voltage
has dropped. The Status Display in the LCD Panel (
15
) will indicate the nature of the problem.
N.B. If the alarm LED remains lit please contact your local Datavideo office.
3
Source Selector Buttons - AUX / KEY-S / KEY-F.
When a PST/B bus crosspoint button (
5
) is pressed while the [AUX] source selector button is held
down, the AUX signals are selected.
