11
The LED indicators alongside the T Bar indicate which bus PGM/A or PST/B is live. The live bus is
indicated by a green LED. During a transition both LEDs will be green, as both PGM/A and PST/B
will be live until the transition is complete.
12
Adjustment Knobs F1 - F4. These are used to set the parameters displayed on the menu.
Menu items are selected and parameters set by rotating [F1] to [F4]. For details on their operation,
refer to the items in
Setting Up.
When the [F1] to [F4] knobs are pushed down, the parameters are returned to their default settings.
(Numerical value setting items only).
13
Format Standard Converter Adjustment Knob. This is used to set the parameters for the six built in
standards converters (DAC-40s). Menu items are selected by pushing the knob down, and
parameters are set up rotating the knob. For further details please refer to the item in
Setting Up
.
14
DAC-40 LCD Display. This LCD displays the settings and parameters for the six built in format
standards converters (DAC-40s). Adjustments are made using the format standard converter
adjustment knob (
13
). For further details please refer to the item in
Setting Up
.
15
Main LCD Display. All of the set up menus and parameters are displayed here (except the 6 x DAC-
40 which are displayed on the DAC-40 LCD Display (
14
). Settings are altered using the adjustment
knobs F1 - F4. For further details please refer to the item in
Setting Up
.
16
FUNC button - Function. When this button is pressed, it is illuminated green. If a wipe pattern
selector button is pressed while the [FUNC] button is green, the wipe pattern selector button will also
illuminate green, and the setting menu of the function indicated below the button appears on the
LCD display.
[TIME]: For setting the auto transition time.
[WIPE]: For setting the wipe border and soft effect.
[CBGD]: For setting the colour background.
[KEY]: For setting the key.
[EDGE]: For setting the key edge.
[FRZ]: For displaying the freeze status display and setting freeze frames
[MEM]: For setting the preset memory or frame memory.
[XPT]: For displaying and setting the crosspoint assignment.
[SETUP]: For performing the system settings.
17
Freeze Status LED. When this LED is lit it means that one of the input signals is set to freeze frame.
When the [FUNC] button is pressed and it’s illuminated green, and the [FRZ] button is pressed, the
freeze status is indicated for each input. (An asterisk appears above the name of a frozen
crosspoint.)
Bear in mind that since the signals are frozen while the indicator is lit, the unit’s output will remain
unchanged even if the input images change.
Example LCD Display
(When crosspoints 2 and 5 are set to freeze frame)
18
Wipe pattern / function selector buttons. These are used to select the wipe patterns. Each button is
used to select one of the nine wipe patterns. The selected wipe button will be illuminated amber
When the [FUNC] button is active (illuminated green), then the function setting menu is selected, and
the selected wipe button is illuminated green.
19
Wipe direction selector switch. This is used to select the wipe direction. There are three options:
N
Sets the wipe pattern to the normal direction
N/R
Sets the wipe direction to alternate. When the first transition is completed, the next transition
will run in the opposite direction. For example if you wipe from A to B top to bottom, when
you wipe back from B to A the wipe will automatically be bottom to top.
R
Sets the wipe pattern to reverse.
