19
Menu 6/15
Output Phase Adjustment
Press the [FUNC] button, so that it is illuminated, and then press the [SET UP] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until OUPHS 6/15 is displayed.
The phase of the video output signals can be adjusted as follows:
By rotating Adjustment Knob F2 you can choose between 0H or 1H:
0H
-
The output video signals are output to the system REF signal output in-phase.
In this mode the frame synchroniser should be ON for all inputs.
1H
-
The output video signals are output to the system REF signal output with 1H delay.
You can adjust Horizontal Phase (HPHS) by rotating Adjustment Knob F3, the range varies according the
system format that you selected - see chart.
Vertical Phase (VPHS) can be adjusted by rotating Adjustment Knob F4.
To leave the menu press the [FUNC] button so that it is no longer illuminated.
Video Format Adjustment Range
1080 / 59i
-1100 to 1099
1080 / 50i
-1320 to 1319
720 / 59i
-825 to 824
720 / 50p
-990 to 989
480 / 59i
-429 to 428
576 / 50i
-432 to 431
