41
Setting an Output to Colour Bar
-
Standard Definition Output Only
Each of the output channels can be set to Colour Bars; this is an aid to setting up your monitors correctly.
The colour bars are not available on High Definition Outputs.
With the LCD displaying the status for channel 1, press the Adjustment Knob to bring up the Format
Standard Converter Adjustment Menu, and rotate the Adjustment Knob until FN07 is displayed.
Press the Adjustment Knob and rotate it to set the Colour Bars to On or Off; and then press the Adjustment
Knob again to store the setting.
To Exit the set up menu rotate the Adjustment Knob clockwise until FN13 - EXIT is displayed and then press
the Adjustment Knob.
Note: If no adjustments are made within 20 seconds the LCD will return to the status display
automatically.
Setting an Output to Crosshatch -
High Definition Output Only
Each of the output channels can be set to a Crosshatch pattern; this is an aid to setting up your monitors
correctly. The Crosshatch is not available on Standard Definition Outputs.
With the LCD displaying the status for channel 1, press the Adjustment Knob to bring up the Format
Standard Converter Adjustment Menu, and rotate the Adjustment Knob until FN07 is displayed.
Press the Adjustment Knob and rotate it to set the Crosshatch to On or Off; and then press the Adjustment
Knob again to store the setting.
To Exit the set up menu rotate the Adjustment Knob clockwise until FN13 - EXIT is displayed and then press
the Adjustment Knob.
Note: If no adjustments are made within 20 seconds the LCD will return to the status display
automatically.
