22
Menu 9/15
GW (Gateway) Settings
Press the [FUNC] button, so that it is illuminated, and then press the [SET UP] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until GW 9/15 is displayed.
The default Gateway is 0.0.0.0.
This can be adjusted if required.
Rotate Adjustment Knob F2, you will see the
*
move across the line from left to right. Position the
*
above the
parameter that you want to change; in the example above the first 0.
Rotate Adjustment Knob F3 to change the value. As you change the value you will see a
!
appear next to the
*
, this indicates that the value has been changed but not stored.
Once you have set the required value press Adjustment Knob F3 - you will see the
!
disappear, which
confirms the new value is stored.
To leave the menu press the [FUNC] button so that it is no longer illuminated.
Menu 10/15
Displaying the MAC Address
Press the [FUNC] button, so that it is illuminated, and then press the [SET UP] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until MAC 10/15 is displayed.
The MAC Address will be displayed, on this case 00073601000
To leave the menu press the [FUNC] button so that it is no longer illuminated.
Menu 11/15
Bus Mode Settings
The SE-1000 has two different bus modes, these affect the way the PGM/A and PST/B crosspoint buttons
work.
In A / B Mode the live output switches between crosspoint rail A (PGM) and crosspoint rail B (PST). Each
time a transition or switch is performed the output will switch from A to B or B to A.
Example:
Before Transition- B is RED
During Transition A / B are RED
After Transition A is RED
