62
GPI Connector
The GPI (General Purpose Interface) Connecter allows for a simple remote control to be added to the SE-
1000. A simple push button will emulate the Auto Button. Each time the button is pressed the SE-1000 will
perform whatever transition is set.
The GPI is a 3.5mm Jack Socket, and wiring a remote is very simple.
Tally Socket
The Tally Socket provides status information for input channels 1 to 6.
The Datavideo TB-10 can translate this data and provide tally light information for the
Datavideo TLM 433 monitors or the ITC-100 Talkback system.
See Useful Accessories for more details of the TLM 433 / ITC-100 / TB-10
The data format is as follows:
Pin No.
Signal Name
Input / Output Type
Description of Signal
1
Input 1
Open Collector Output
Tally Output - Video Input 1
2
Input 2
Open Collector Output
Tally Output - Video Input 2
3
Input 3
Open Collector Output
Tally Output - Video Input 3
4
Input 4
Open Collector Output
Tally Output - Video Input 4
5
Input 5
Open Collector Output
Tally Output - Video Input 5
6
Input 6
Open Collector Output
Tally Output _ Video Input 6 (DVI)
7
Enable
Input
Enable Signal of Tally Output
Open: Active Closed: Inactive
8
Alarm
Open Collector Output
Fan Alarm / PSU Alarm Output
9
Ground Ground
Ground
