30
CBGD Menus
Setting the Background Colour
Menu 1/5
CBGD - Colour Background
The CBGD Menu 1/5 allows you to set the colour of the background
CBGD Menus 2/5 to 5/5 allow you to set four custom colours - USR1 to USR4 - these can be used in the
EDGE, KEY, CBGD and WIPE Settings.
Press the [FUNC] button, so that it is illuminated, and then press the [CBGD] button, so that it is also
illuminated.
Rotate Adjustment Knob F1 until CBGD 1/5 is displayed.
Rotate Adjustment Knob F2 to select the colour you require. There are eight preset colours available, plus
four custom colours (USR1 to USR4) (see
USR1 to USR4 Setting Custom Colours
).
To leave the menu press the [FUNC] button so that it is no longer illuminated.
Menus 2/5 to 5/5
USR1 to USR4 Setting Custom Colours
The following settings apply to:
CBGD Menus 2/5 to 5/5
EDGE Menus 2/5 to 5/5
KEY Menus 4/7 to 7/7
WIPE Menus 2/5 to 5/5
USR-1 to USR-4 allow you to set custom colours which can be used in the same way as the eight preset
colours. Once set, the custom colours are stored even when the unit is switched off.
Adjusting any one of the menus will change the settings in all of the menus; e.g. USR1 in EDGE, KEY,
CBGD & WIPE is the same setting.
In order to see what you are adjusting you will firstly need to assign CBGD to a crosspoint (see
XPTAS
Assigning Crosspoints - page 25
). Select the crosspoint that has been assigned as CBGD as the Program
(PGM) Output, you should see a solid background colour on your output monitor.
