Datalogic Rhino II, User Manual

Page: 40 / 168

Rhino II Configuration
34 Rhino™ II
#KUSE2 for Creative Inscriptions
With #KUSE2 a complete 2nd Layout for a key from the section [Keys]
can be set. #KUSE2 must be always at the end of the Keydefinition.
The first Keytext should be explicit defined with “Text“.
The fields
BMPNormal
,
BMPActive
of the KUSE2-Layouts will always
be ignored.
#KUSE2 always applies only to the definition of a current key.
Example:
L05_Norm = ...|VK_F1;"F1";#KUSE2=<
Layout2
>;"This is the KUSE2
Text :-)"|...
L05_Norm = ...|VK_F1;"F1";#KUSE2=<
Layout2
>;"This is 0x0A two
lines added"|...
Keycodes definition with #EXT
If you want to assign a key with multiple codes, this is done by means
of
#EXT definition within a key definition. Using #EXT only the
symbolic name of the definition is indicated. The actual definition of
each key code will be executed in the section
[Extended Keys] :
DefName1=Key1,Key2,Key3,.....
DefName2=Key1,Key2,Key3,.....
In the section a maximum of 20 different strings can be defined with
multiple key codes. The maximum length of the symbolic name
DefName is 50 characters. In a definition (in a row) a maximum of
100 key codes may be defined. As a separator between different
codes a comma is used. To generate a comma, this can be done
through the name VK_COMMA.
#EXEC=<exedef>
Executing of Windows-Shell-Commands. In <exedef>
defined Name must indicate a definition from the
Section [Execute]. In the Execute section all commands
must be defined and grouped together to perform.