Datalogic Rhino II, User Manual

Page: 38 / 168

Rhino II Configuration
32 Rhino™ II
Syntax of a Key Definition
The syntax of a key is constructed as:
"
#Command;VK_CODE;Text¦
"
Single Fields and Commands will be separated through a Semicolon
(;).
Each Key must be finished with the vertical bar character ("¦"
Ascii-Code=124).
Special Commands will be introduced with the Character "#".
Should one of these reserved characters be indicated in the text or as
a key code, the Hex-Code must be used:
• "|" = "0x7C"
• "#" = "0x23"
• ";" = "0x3B"
The fields "
#Command
" and "
Text
" are optional, so that a minimum
definition can look like: "A|"
The generated Key code as well as the label of the key is defined with
"A". This works with single characters only. For other special keys,
special "Virtual Keycodes (VK)" are defined. (See table below).
If in a text for a key the combination "0x0A" is used, it will enforce a
word-wrap in the label of this key.
Example: "Row 1 0x0A Row 2"
However the possibility of vertical centering will be lost if using
word-wrap.
Commands for Key Definitions
Important : Position fixes and changes are evaluated only in the
"LXX_ Norm " line. The Shift and AltGr-definition position changes are
ignored, as it could otherwise lead to conflicting data.