Datalogic DX8210 Reference Manual Download Page 176

Page: 176 / 300

User Interface

164

DX8210 Barcode Scanner

Device Settings | Device Info

Use the Device Info window to view information about each device in the system

including description, serial number and address. The information on this page

is not editable.

o view the Device Info window:

1. In the menu under Modify Settings, navigate to Device Settings | Device

Name (if applicable) | Device Info. The Device Info window opens.

2. View the following scanner information.

Description

Displays the scanner description entered in the

System Info

window.

Device Address

Displays the system address which is generated from the Dev information found on

the System Information page.

Serial Number

Displays the serial number sent by the device.

MAC Address

Displays the MAC (media access control) address of the device.

Model Name

Displays the Model name sent by the device.

Model Number

Displays the Model number sent by the device.

Hardware Release

Displays the hardware release number of the device.

Number Legs

Displays the number of laser legs (beams) produced by the device. Each DS8110

(Line) scanner has 1 leg, while each DX8210 (X) scanner has 2 legs.

Number Lasers

Displays the number or lasers used by the scanner.

Number Facets

Displays the number of facets in the mirror wheel.

Summary of Contents for DX8210













































































































































































































































































































Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands

Datalogic DX8210, Reference Manual

Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands