Datalogic DX8210 Reference Manual Download Page 212

Page: 212 / 300

Barcode Scanning Features

200

DX8210 Barcode Scanner

Control Panel Buttons

X-PRESS™ Human Machine Interface

X-Press is the intuitive Human Machine Interface designed to improve ease of

installation and maintenance.
Status information is clearly presented by means of the five colored LEDs,

whereas the single push button gives immediate access to the following relevant

functions:

• TEST with bar graph visualization to check static reading performance

• LEARN to self-detect and auto-configure for reading unknown codes

• SETUP to allow the open Ethernet port in the last slave scanner in a Master/

Slave system to work as a dedicated setup port

• NETCONFIG to locate and configure slave scanners in a array (tunnel)

X-PRESS Functions

Quick access to the following functions is provided by an easy procedure using

the push button:

1. Press the button (the Status LED will give a visual feedback).
2. Hold the button until the specific function LED is on (TEST, LEARN, SETUP,

or NETCONFIG).

3. Release the button to enter the specific function.

Summary of Contents for DX8210













































































































































































































































































































Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands

Datalogic DX8210, Reference Manual

Search results

Summary of Contents for DX8210

Reviews:

Related manuals for DX8210

Brands by name

Popular brands