Datacolor 9020-0129 Operating Manual Download

Page: 8 / 127

Datacolor CONDITIONER™ (MB2) 06/2017

page 8/126

Prohibition signs

Do NOT touch

Do NOT spray with

water

Do NOT climb

Information

to be observed in order to ensure optimum function of the product.

1.2.4 Word message panel structure

Type / cause of hazard.

Possible consequences.

∅

Instruction how to avoid the hazard: prohibition



Instruction how to avoid the hazard: mandatory action.

Observe all other notes and information not necessarily emphasized in the same way, in order to avoid
disruptions that could result in direct or indirect injury or property damage.

1.3

Localization / position of safety labels on the cabinet

The following labels are located on the cabinet:

Pictograms (warning signs)

Hot surface (inner glass door above the glass door handle)

Burning and scalding hazard (cabinet rear)

Figure 1: Position of labels on the cabinet rear

Summary of Contents for 9020-0129
































































































































Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands

Datacolor 9020-0129, Operating Manual

Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands