Datacolor 9020-0129 Operating Manual Download

Page: 92 / 127

Datacolor CONDITIONER™ (MB2) 06/2017

page 92/126

“Date and time” submenu.

In the field “Daylight saving time switch” select
the desired setting “Automatic” or “Inactive”.

“Date and time” submenu.

Select the desired time zone and press the

Confirm

icon.

“Date and time” submenu. Select the desired
start of the daylight saving time.

“Date and time” submenu. Select the desired
end of the daylight saving time and press the

Confirm

icon.

After completing the settings, press the

Confirm

icon to take over the entries and exit the menu,

press

the

Close

icon to exit the menu without taking over the entries.

14.4 Display configuration

14.4.1 Adapting the display parameters

This function serves to configure parameters like display brightness and operating times.

Path:

Main menu > Settings > Display > Display

“Display” submenu.

Summary of Contents for 9020-0129
































































































































Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands

Datacolor 9020-0129, Operating Manual

Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands