Datacolor CONDITIONER™ (MB2) 06/2017
page 48/126
7.2
Direct setpoint entry for temperature, humidity, and light intensity via
Normal display
Alternatively you can also enter the setpoints directly via Normal display.
Normal display (example: cabinet with lights)
Select the setpoint you want to change.
Example: “Temperature” entry menu. Enter the de-
sired setpoint and confirm entry with
Confirm
icon.
7.3
Special controller functions via operation lines
Press the
Setpoint setting
icon to access the “Setpoint” setting menu from Normal display.
You can define the switching state of up to 16 operation lines (control contacts). They are used to activate
/ deactivate special controller functions.
•
Operation line “Humidity off” serves to turn off the humidity.
•
Operation line Idle mode” activates / deactivates the operating mode “Idle mode”.
The other operation lines are without function.
Use the “Setpoints” menu to configure the operation lines.
“Setpoints” menu (example: cabinet with lights)
Select the field “Functions on/off”.
“Functions on/off” entry menu.
Mark / unmark the checkbox to activate / deac-
tivate the desired function.
Activated operation line: switching status “1” (On), deactivated operation line: switching status “0” (Off)
The operation lines count from right to left.
Example:
Activated operation line “Humidity off” = 000000000000000
1
Deactivated operation line “Humidity off” = 000000000000000
0
