Datacolor 9020-0129 Operating Manual Download

Page: 113 / 127

Datacolor CONDITIONER™ (MB2) 06/2017

page 113/126

20.3.1 Cleaning

Disconnect the cabinet from the power supply before cleaning. Disconnect the power plug.

The interior of the cabinet must be kept clean. Thoroughly remove any residues of test mate-
rial.

Wipe the surfaces with a moistened towel. In addition, you can use the following cleaning agents:

Exterior surfaces
inner chamber
racks
door gaskets

Standard commercial cleaning detergents free from acid or halides.

Alcohol-based solutions.

We recommend using the neutral cleaning agent Art. No. 1002-0016.

Instrument panel

Standard commercial cleaning detergents free from acid or halides.

We recommend using the neutral cleaning agent Art. No. 1002-0016.

Zinc coated hinge
parts
rear cabinet wall

Standard commercial cleaning detergents free from acid or halides.

Do NOT use a neutral cleaning agent on zinc coated surfaces.

Do not use cleaning agents that may cause a hazard due to reaction with components of the device or
the charging material. If there is doubt regarding the suitability of cleaning products, please contact your
local Datacolor service representative.

We recommend using the neutral cleaning agent Art. No. 1002-0016 for a thorough cleaning.

Any corrosive damage that may arise following use of other cleaning agents is excluded from
liability by the manufacturer.

Any corrosive damage caused by a lack of cleaning, is excluded from liability by the manufac-
turer.

CAUTION

Danger of corrosion.

Damage to the cabinet.

∅

Do NOT use acidic or chlorine cleaning detergents.

∅

Do NOT use a neutral cleaning agent on other kind of surfaces e.g., the zinc coated

hinge parts or the rear cabinet wall.

Summary of Contents for 9020-0129
































































































































Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands

Datacolor 9020-0129, Operating Manual

Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands