Data General AViiON 4600 Series, Customer Documentation

Page: 131 / 266

Adding or Replacing Internal Mass–Storage Devices
7-9
014–002091
Installing a Drive Assembly
After you configure your new or replacement drive, you can attach the brackets to
form a drive assembly, and then (re)install the assembly into your computer chassis.
Attaching Brackets to a Drive
To attach the brackets to the new drive, follow the steps below. You will need a
medium (#2) Phillips screwdriver.
1. Grasping the new drive by its edges, align the appropriate mounting holes in the
bracket with the holes in the side of the drive. A half-height drive fills half of
the bracket. Figure 7Ć8 shows the mounting holes for for each type of drive.
4 3 2 1
1 6 2 3 4
332–Mbyte disk 2 or 4
1
520–Mbyte disk 4
1
600–Mbyte CD-ROM 2
150–Mbyte QIC cartridge tape 1
525–Mbyte QIC cartridge tape 5
1.2–Mbyte diskette 2
1.44–Mbyte diskette 4
Digital audio tape 4
2–Gbyte tape 6
1–Gbyte disk 6
1.4–Gbyte disk 6
662–Mbyte disk 6
1 Mounts to 3 1/2Ć to 5 1/4Ćinch conversion brackets
Half–Height Drives
Mounting Hole Numbers
Drive mounting bracket
Full–height Drives Mounting Hole Numbers
5
6
5
1 6 2 3 4
5
1 2 3 6 4
5
1 2 3 6 4
5
Figure 7-8 Bracket Mounting Holes for Drives