Data General AViiON 4600 Series, Customer Documentation

Page: 102 / 266

Using the SCM Configuration Menus
5-18
014–002091
Type the item number of the baud rate you want and press New Line. Refer to the
documentation that came with your mouse for information about supported baud
rates. The next time you reset or restart your computer, the system will use the baud
rate you set.
Viewing the System Configuration
While in the View or Change System Configuration menu, type , and press New Line
to select item 5, View system configuration." The system displays the same
information you see in the powerup initialization messages.
The display indicates what revision of PROM software is installed in your system, how
many processors are installed, the type (if any) of graphics controller, and the keyboard
language for a graphics console. It shows memory module numbers for each available
slot and lists whether the slot contains a memory module or not. The following
example shows the memory configuration display for a computer with one pair of
16-Mbyte memory modules. Refer to Chapter 8 for configuration limitations and
instructions for removing and installing memory modules.
Firmware Revision xx.xx
Single Processor
Color Graphics [none/8–bit/24–bit]
Current Keyboard language is [U.S. English
Memory size is 32 Mbytes
Top of memory = 1FFFFFC hex
Top of memory for use = 1FDFFFC hex
Memory module 0 contains 16 Mbytes
Memory module 1 contains 16 Mbytes
Integrated SCSI:
ID 0: MAXTOR Disk Drive, Boot specification – sd(ncsc(0),0)
ID 1: MAXTOR Disk Drive, Boot specification – sd(ncsc(0),1)
ID 4: ARCHIVE Tape Drive, Boot specification – st(ncsc(0),4)
ID 5: ARCHIVE Tape Drive, Boot specification – st(ncsc(0),5)
Integrated LAN: Ethernet Address is 08:00:1B:xx:xx:xx
: Boot specification – dgen(0)
Press any key to continue....