Data General AViiON 4600 Series, Customer Documentation

Page: 56 / 266

Setting Up Your Computer System
2-16
014–002091
Connecting the Computer Unit Power Cord
After you have assembled your computer system, use these steps to connect the
computer unit power cord to an ac outlet and complete your set-up procedures.
Reverse the order of these steps to disconnect the computer unit power cord.
CAUTION: Make sure that the computer unit power switch is off before connecting the
power cord.
1. Locate the computer unit power cord. The correct power cord part number
ensures that you are using a proper cord for your site's voltage. AViiON 530 and
4600 series computers use the following power cords:
Cord part number model number Country
120 volt 109-996 US
100 volt 109-996 -1 US/Canada
240 volt 109-813 -5 UK
1
240 volt 109-809 -6 Australia
220 volt 109-812 -7 Europe
2
220 volt 109-811 -8 Italy
220 volt 109-815 -9 Denmark
220 volt 109-810 -0 Switzerland
1
Used in Bangladesh, Bermuda, Hong Kong, Nigeria, Pakistan, Singapore,
Sri Lanka, and the United Arab Republics.
2
Excluding Italy, Switzerland, the United Kingdom, and Denmark.
2. The computer unit is shipped with a yellow and black warning label covering the
rear panel ac connector. Examine the computer unit's device rating label to be
sure your computer unit's voltage is properly set for your site. If the label
indicates proper voltage, remove the warning label and plug the female end of the
computer unit power cord into the ac connector as shown in Figure 2Ć15.
3. Plug the male end of the computer unit power cord into an ac outlet.