DATA DISPLAY GROUP
Manual
F/W
Version
Date
Description
2.2.0 22.07.2009
Added playlist support, audio volume can be set for each clip
individually
Added “Content Auto Update” function. Content is stored on a FTP
server. ArtistaMEDIA checks it for content updates periodically and
downloads changes automatically
Improved content update. While receiving new content,
ArtistaMEDIA continues to play the old content. When all new files
are available, ArtistaMEDIA switches to the new content
Improved content update over network. Content update over
network is optimized to minimize network traffic. Just new files are
transmitted
Added automatic video mode detection. Video modes 720 x 480 @
29,97 fps and 720 x 576 @ 25 fps are detected automatically now.
No configuration in Web Frontend necessary any more
Added date and time configuration in Web Frontend. The onboard
clock is used to create valid timestamps for the log files
Added log file to get statistics about content updates
Added log file to get statistics about played clips
1.2.0 05.11.2008
Solved audio/video sync issue during playback of videos with 25
and 29.97 fps
Solved issue with empty Gateway IP address in Web Frontend (if it
was set to empty, the ArtistaMEDIA board was not reachable any
more)
Solved audio clipping for audio clips with high recording level
Improved Maintenance Mode for firmware updates
Improved content upload over ACC and SDK
Improved factory default values
Enhanced support for Artista SDK
Artista SDK support can be disabled by setting the ArtistaMEDIA
Server IP address to empty in the Web Frontend
ArtistaMEDIA Upload Data Port can be configured in Web Frontend
now
Added button in Web Frontend to format the media storage
Reworked Web Frontend to Data Display Group CI
1.0.0 09.07.2008
Initial
Release
ArtistaMEDIA
Version 1.12
05.10.2011
Page 41 of 49
