DATA DISPLAY GROUP
Manual
Load Factory Defaults:
This button can be used to preload the network configuration fields in the Web Frontend with the
factory defaults. Press “
Submit Configuration
” to save these values on the board and restart it to
make the new settings take effect.
7.2.3
Firmware Update
The picture below shows the firmware update menu in maintenance mode.
To install a firmware update the following steps have to be executed:
Press “
Browse …
” and select the firmware update package in the file system of your PC
Press “
Upload Firmware Image to ArtistaMEDIA
”
Firmware update takes about 2 minutes. Messages showing the progress of the update
process are displayed on the Web Frontend
When the update process has been finished, restart the ArtistaMEDIA board by selecting
the menu “
Restart Artista
” and pressing the button “
Enter Normal Operating Mode
”
Further details on the firmware update procedure can be found in section
Firmware Update
.
ArtistaMEDIA
Version 1.12
05.10.2011
Page 26 of 49
