DATA DISPLAY GROUP
Manual
7.1.10
Firmware Update
The picture below shows the firmware update menu of the ArtistaMEDIA Web Frontend in normal
operating mode.
This procedure for firmware updates is supported for firmware version 1.2.0 and higher. If the
installed firmware version is 1.0.0 a different update procedure must be used. Please contact Distec
support for further information.
Enter Maintenance Mode:
This button is used to restart ArtistaMEDIA in maintenance mode. To get the welcome page of the
ArtistaMEDIA maintenance mode press the reload button of your browser after about 2 minutes.
Follow the update instructions in section
Firmware Update
then.
ArtistaMEDIA
Version 1.12
05.10.2011
Page 21 of 49