DATA DISPLAY GROUP
Manual
14
Pre-configured Default Values
TBD
15
Functions of the LEDs on the ArtistaMEDIA Board
There are several LEDs available on the ArtistaMEDIA board. The functions of all the LEDs are
described below.
Reference Label
Colour
Function
LED 1
+5V
Red
On
: Panel power supply is configured to +5 V
Off
: If both LED1 and LED2 are off, the panel power supply is
configured to + 3.3 V
LED 2
+12V
Blue
On: Panel Power Supply is configured to +12 V
Off: If both LED1 and LED2 are off, the panel power supply is
configured to + 3.3 V
LED 3
GP3
Red
TBD
LED 4
GP4
Green
TBD
LED 5
ACTIVE
Green
On
: Signals activity on the IDE bus (Compact Flash card or
Hard Disk Drive)
LED 6
GP1
Red
Flashing once if the network configuration has been reset to
the factory default values (for more details see section
Reset
ArtistaMEDIA to Network Factory Default Values
)
LED 7
GP2
Green
Flashing once if the network configuration has been reset to
the factory default values (for more details see section
Reset
ArtistaMEDIA to Network Factory Default Values
)
16
Firmware Release History
F/W
Version
Date
Description
2.12.0 05.10.2011
Added support to display still images (AIB format) with the
resolution of 800 x 480
Fixed issue where in very rare situations a video couldn’t be started
after a still image in native display resolution has been shown.
After this issue occurred, the next videos and still images couldn’t
be displayed properly any more. A player restart was necessary to
recover from that error
Fixed issue where sometimes the beginning of a video was
corrupted for about a second when a still image in native display
resolution has been shown before
ArtistaMEDIA
Version 1.12
05.10.2011
Page 38 of 49
