DATA DISPLAY GROUP
Manual
7.2
Maintenance Mode
Beside the normal operating mode ArtistaMEDIA also has a maintenance mode. This mode is used
in two cases:
1.
Firmware update
Enter the Web Frontend in normal operating mode
Select the menu “
Firmware Update
”
Press the button “
Enter Maintenance Mode
”
ArtistaMEDIA reboots now in maintenance mode
2.
Reset the network configuration of the board to the factory defaults
If you follow the instructions in section
Reset ArtistaMEDIA to Network Factory Default
Values
, ArtistaMEDIA boots in maintenance mode as well.
Note: If ArtistaMEDIA is running in maintenance mode, the player and the display is switched off.
The header of the Web Frontend is red and has the caption “
ArtistaMEDIA Maintenance Mode
”.
7.2.1
Home
The picture below shows the ArtistaMEDIA Web Frontend welcome screen if the board is running
in maintenance mode.
ArtistaMEDIA
Version 1.12
05.10.2011
Page 24 of 49
